Allpro ScanX trek D5000-T, Руководство оператора, Страница: 4 / 28

ALLPRO Imaging Page 4
ScanX has been designed to minimize exposure of personnel to hazards . While the equipment is designed
for safe operation, certain precautions must be observed . Use of the ScanX not in conformance with the
instructions specified in this manual may result in permanent failure of the unit .
General.

Check with your dealer for packing material requirements if it is necessary to return the product
to the manufacturer . Correct packing guarantees optimal safety of the device during transport .
Should it become necessary to return the device to the manufacturer during the warranty period,
the manufacturer will not accept claims for damage arising from using incorrect packing materials .

Before every use, the operator must check the functional safety and the condition of the device .

The operator must be knowledgeable in the operation of the device .
Use of Accessory Equipment.
The use of ACCESSORY equipment not complying with the equivalent safety requirements of this
equipment may lead to a reduced level of safety of the resulting system .
Use of ACCESSORIES or cables other than those specified or provided by the manufacturer may result
in increased EMISSIONS or decreased IMMUNITY of the EQUIPMENT .
Do Not Attempt Internal Service.
The interior of each component of ScanX is only accessible by removing hardware with tools and
should only be opened and serviced by an authorized dealer service technician .
Contact your local authorized dealer for service . Failure to heed this directive may result in equipment damage
and voiding the warranty .
Electrical Safety Notes.

The main power switch is the main power disconnect device .

Use only the line cord provided with the unit .

Use only grounded electrical connections .

To avoid risk of electric shock, fire, short-circuit or dangerous emissions, never insert any metallic
object into the equipment .

Only use connection cable(s) delivered with the device .

Check the device cables for possible damage before switching on . Damaged cables, plugs and
sockets must be replaced before use .

Never touch open supply outlets and patients simultaneously .

Do not locate unit where it could be sprayed with water, or in a damp environment .
GENERAL SAFETY