Allpro ScanX trek D5000-T, Руководство оператора, Страница: 24 / 28

ALLPRO Imaging Page 24
Maintenance Procedures
The ScanX is designed for many years of trouble-free operation . Maintenance as described herein is
minimal .
IMPORTANT: Do not spray solvents or liquid directly on the scanner.
Cleaning the ScanX
Turn off the ScanX disconnect the line cord from the Mains wall outlet and disconnect the computer
connection cable from the ScanX before cleaning . Wipe the outside surfaces with a soft paper towel
dampened with a disinfectant solution or non-abrasive household cleaner . Be careful not to allow
solvents TO RUN OR DRIP into the ScanX . This could cause damage to the ScanX . Allow to air dry
before plugging in or turning back on .
Cleaning the Plate Transport
Over time, small debris and dust can accumulate in the plate transport mechanism causing a loss in image
quality and possible damage to the PSPs . To ensure optimal performance of the ScanX, the plate transport
should be cleaned at least once per week using a new ScanX Cleaning Sheet each time . Sample sheets
are included with the ScanX and additional sheets can be purchased from your dealer .
Phosphor Storage Plates (PSPs)
PSP's are subject to "wear" on the black side during normal handling and use . They can appear scratched,
while the sensitive blue or white side remains relatively "smooth" . This scratched look on the black side has
absolutely no effect on the quality of the image and should be expected under normal conditions . If the
phosphor side is scratched make sure the plates are being handled properly and not being dragged from
the ScanX tray area or other surfaces that could cause scratching of the plate . Make sure to review the
Plate Care and Preparation information provided on page 17 of this manual .
Like all precision products, the ScanX requires a certain amount of care on a regularly scheduled basis .
A well-organized maintenance program aids dependable equipment operation and reduces problems to
a minimum . Routine checks help to detect general overall wear, and replacement of parts can often be
made before a problem occurs . Adherence to the maintenance schedule will ensure that the ScanX Digital
Imaging System will continue performing at its best with uninterrupted service .
Understanding this, we have established three basic maintenance kits that will help insure continuous
operation of the ScanX Digital Imaging System . The kits and their associated parts number along with the
recommended performance schedule are listed below .
Service Requirement Schedule Kit Part No.
Replace dust/debris brush on inlet ring assembly 1 year D5940
Replace four transport belt drive belt assemblies 4 years B7794
Replace 5A, 250VAC, 3AG Slo-Blo Battery fuse.
As
Necessary
D5470
IMPORTANT: All service requiring access to the interior of the ScanX must be performed only by an
authorized dealer service technician with the proper training.
MAINTENANCE
SCHEDULED MAINTENANCE