18
2.4.3
802.1Q Control Per Port Config
The above screen allows you to control individual port 802.1Q settings:
Ø
Port No
– Select the port to be configured. Only the
red-colored
leading port will been shown
in the dropdown if a trunk group has been created.
Ø
Tag Config –
There are two parameters in this field:
Priority
(0-7) and
VID
(1-4094).
Set the 2 parameters to determine the 802.1Q tag contents.
Ø
Non 1Q Frame –
This determines what will occur to packets that do not match the 802.1Q VID
assigned to this port. Options are:
Drop
:- to drop the non matching packet, and
Not Drop
:- to
forward the packet.
Below the configuration screen, there are three buttons to select from:
View Settings : Select the
Port No
from the above table and click this button to see the specified port
tag settings.
Apply: To submit the port configuration settings to the switch.
Back : To go back to the 802.1Q main settings page.
