Chapter 3: Setting Up the NetEnforcer
NetEnforcer AC-2500 Hardware Guide
3-9
Modifying Date and Time Settings
You can modify date and time settings as required. You can set the system time
manually, or you can set up NetEnforcer to receive time checks from an NTP (Network
Time Protocol) server, if you have one on your network.
To modify the date and time settings:
1.
In the NetEnforcer Setup
Menu, enter
4
(Set time) and press <
Enter
>.
The Time Setup screen is displayed:
Figure
3-5 – Time Setup
The current day, date, system time and time zone are displayed at the top of the
screen.
2.
To change the time zone, perform the following steps:
•
Enter
1
and press <
Enter
>.
•
Enter
y
and press <
Enter
>. NetEnforcer displays a list of time zones.
•
Enter the required time zone and press <
Enter
>.
3.
To change the system time, perform the following steps:
•
Enter
2
and press <
Enter
>.
•
Enter the new date and time in the format DD-MM-YYY -HH-mm. For
example, 12-05-2001-11-20 for 12
th
May 2001, 11:20 am.