6
WHAT’S IN THE BOX?
Please check that the shipping box contains the following:
•
One (1) Allnic H-6500 phono-stage – in natural aluminum or black, depending on
your order specification
•
One (1) Power Supply for the H-6500 in natural aluminum or black, depending
on your order specification
•
One (1) power umbilical cord
•
One (1) IEC type power cord
•
One (1) Owner’s Manual
Note:
1)
The H-6500 and its power supply ship with the tubes installed.
2)
The H-6500 power supply will work with most IEC type aftermarket power cords.
Allnic’s ZL Technology cables will function synergistically with the H-6500. Of
course, only you can determine the power cord that works most synergistically
with the H-6500 in your system.
3)
Be sure the H-6500 power supply unit is labeled for the AC voltage of your
location. If it is not, please contact your Allnic Audio dealer.
We advise that you keep the boxes and other packing materials that your H-6500 came
in. It will be useful if you sell your H-6500 or in the unlikely event you need to ship it or
the power supply for service.
SAFETY
•
Disconnect the power cord by pulling the plug, not the cable.
•
Do not attempt any repairs. Do not remove the units’ chassis covers without specific
authorization from Allnic Audio.
•
Keep the power cords away from heat sources
.
•
Keep the units away from liquids – do not allow any liquid to enter the interior of the
units.
•
When the units are moved from a cold to a warm environment, allow sufficient time
for any condensation to evaporate in both units before plugging the power supply
unit into an AC connection.
•
Do not attempt any repairs.
•
Do not remove the units’ chassis covers without specific authorization from Allnic
Audio.
•
See the notes on “Location, Location, Location”.
