12
SPECIFICATIONS FOR THE ALLNIC AUDIO H-6500 PHONO-STAGE
•
Inputs:
Moving Coil (MC) × two (2) pairs unbalanced (RCA)
Moving Magnet (MM) x two (2) pairs unbalanced (RCA)
•
Ground:
Two (2) x screw type terminals
•
Outputs:
One (1) pair x unbalanced (RCA)
•
Input Impedance:
MC up to 117Ω (see “Impedance” in “Initial Set-Up”)
MM 47kΩ
•
Frequency (RIAA):
20Hz ~ 20KHz (±0.3db)
•
Voltage Gain:
+40db (1KHz) MM
+66db (1Khz) MC
•
Maximum Input Voltage
(MM, non-clipping):
20Hz / 30mV
100Hz / 100mV
1KHz / 240mV
10KHz / 280mV
•
THD
(Total Harmonic
Distortion):
Less than 0.17% (1KHz, Output 1V)
•
Output Impedance:
430Ω (On - off method)
•
S/N Ratio:
-86db (CCIR, 1KHz)
•
Tubes:
5842 x 8, signal gain (similar to WE 417A).
7233 x 2, series voltage regulator (similar to CV4079).
5654 x 2, automatic voltage regulator (similar to 6AK5W,
CV4010, M8100, 6096, E95F 6096).
5AR4 x 1, rectifier - in the power supply (equivalents
possible – consult your Allnic dealer).
•
Power Consumption:
70W – 110/220 / 60Hz
•
Fuse:
AC 3A, 250V slow-blow for 110/120V regions
AC 2A, 250V slow-blow for 230/240V regions
