ALLNIC AUDIO 25th Anniversary T-2000, Руководство пользователя

Страница: 6 / 16

6
SAFETY
•
Remove ALL protective cushioning material (cardboard around tubes) inside the tube
chimneys before operation. The tube chimneys should contain NOTHING except the tubes.
•
Disconnect the power cord by pulling the plug, not the cable.
•
Do not attempt any repairs. Do not remove the unit’s chassis cover without specific
authorization from your Allnic Audio dealer.
•
Keep the power cord away from heat sources.
•
Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.
• When the unit is moved from a cold to a warm environment, allow sufficient time for any
condensation to evaporate before plugging the T-2000 25 th Anniversary into an AC connection.
• Do not attempt any repairs.
• See the notes on “Location, Location, Location”.
CLEANING
A. Chassis and glass/plastic
Use only a soft, lint-free cloth, dampened slightly with water only (NO cleaning fluids!), to clean the
faceplate, chassis and tube chimneys of the T-2000 25 th Anniversary .
B. Connectors
You may use any good quality contact cleaner recommended for such applications to clean the contacts
from time to time, as you deem appropriate.
INITIAL SET-UP
A. LOCATION, LOCATION, LOCATION
Like all audio products using tubes, the Allnic Audio T-2000 25 th Anniversary needs to be placed on a solid
stand in a location that provides good air circulation around, above and below the stereo amplifier.
•
DO NOT cover the top of the T-2000 25
th
Anniversary .
•
DO NOT place the unit on carpet or foam.
•
DO NOT subject the unit to knocks and shocks as you move it around. This advice is meant
particularly for those who may want to place the T-2000 25 th Anniversary on some kind of after-
market isolation feet or similar devices. Dropping one side of the T-2000 25 th Anniversary , or the
whole of the unit, is not a good thing to do.
• DO NOT place the unit near a strong light or heat source.
• DO NOT place anything heavy on the unit.
• DO NOT allow rubber or vinyl materials to rest on the chassis for long periods of time. This could
discolour the metal.
• DO place the unit on a shelf or stand that is stable and not subject to vibration or sudden shock.