ALLNIC AUDIO 25th Anniversary T-2000, Руководство пользователя

Страница: 10 / 16

10
speakers; however, some users may prefer not to hear it. To avoid the sound, simply switch the T-2000
25 th Anniversary to pentode mode prior to turning it off.
In the case of any failure, please contact your Allnic Audio dealer for assistance.
THE CURRENT METERS
The two illuminated meters indicate the current supplies to the four KT150 power tubes in the T-2000 25
th
Anniversary (refer to Figure 8). Between and to the outside of each channel pair of KT150s is a small toggle
switch. Pushing the toggle toward the rear of the chassis allows you to read and use the meter to bias the
rear KT150 for that side; pushing the toggle toward the front switches the meter to the front KT150. You
can use the toggle during operation.
There is a potentiometer for each KT150 (Refer to Figure 7). When you turn on the T-2000 25 th
Anniversary , the needle of the current meter for each KT150 should be between the two parallel lines on
the meter face. Any error of current supply to or failure of a KT150 tube is indicated by the needle on the
meter moving out from between these two parallel lines.
If a meter’s needle moves to or below the left parallel line on the meter face during operation, this
indicates a failure of the related KT150 tube. You must turn off the T-2000 25 th Anniversary and replace
both the fuse (0.5A, 250V, 20mm glass type) for that tube and the KT150.
To replace a fuse, unplug the T-2000 25 th Anniversary ; then, using a screwdriver, simply turn the top of
the fuse cap counter clockwise. It will spring out holding the fuse. Replace the fuse in the fuse cap, push
the fuse cap down and turn it so it locks. If you have any questions about doing this, please contact your
Allnic Audio dealer for assistance.
WARRANTY
FOR WARRANTY SERVICE, PLEASE CONTACT YOUR AUTHORIZED ALLNIC DEALER.
All Allnic Audio amplifier products are warranted against materials and manufacturing defects for
parts, excluding tubes, and labour for two (2) years from date of purchase. Tubes are warranted
against materials and manufacturing defects for one (1) year from date of purchase. The warranty
is transferable for the balance of the original purchaser’s warranty period, provided, as stated
below, no unauthorized repairs or modifications have been performed on the product. Date of
purchase is the date indicated on the invoice for the product issued by Allnic Audio or its
authorized representative. For the warranty to be valid, a defective product must be returned to
Allnic Audio’s authorized representative for service prior to any unauthorized attempt to repair.
Any repair work on an Allnic Audio product not specifically authorized by Allnic Audio or its
authorized representative will void the warranty on the product.