ALL1681205 - User Manual
Page 33
of 44
ALLNET GmbH Computersysteme 2015 – All rights reserved
Home
The Home menu provides a list of all the possible tasks you can perform in the
HomePlug AV Utility.
To start a task:
1.
Select the network card connected to your HomePlug AV/AV2 device.
This is most helpful when you have more than one network card in your
computer. When you select a network card, the MAC Address of the HomePlug
AV/AV2 connected to your computer appears. If there is no HomePlug AV/AV2
connected to your computer, no MAC address will appear.
2.
Select
a task.
there are four possible tasks you can perform as seen below:
•
Change the Private Network Name
•
Change the QoS settings
•
View devices in the network
•
Upgrade the firmware
When you select any of the tasks available, you will be forwarded to the respective tab
of the selected task you have chosen.
