Allied Ho-Pac 1600 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 50

Allied Ho-Pac 1600 Скачать руководство пользователя страница 17

Allied Construction Products, LLC. www.alliedcp.com

7

TM103337_HP1600_18feb

6.0 Mounting Information

6.1 Mounting Overview

Figures and descriptions represent standard
configurations.

Fig. 6-1 Mounting Bracket

Fig. 6-2 Flat Top Frame

The combination of Top Frame and mounting
components provide the connection point for
attaching the Ho-Pac to the carrier.

There are two types of top frames available:

x

Flat Top (Fig. 6-2)

x

VMS (Fig. 6-3).

6.1.1 Flat Top Mounting

The Flat-Top frame design includes a connection
plate for the bolt-on mounting bracket (Fig. 6-1).
Connection plates are grouped by size into Allied
mounting families. Dimensions of the plate, including
thickness, bolt hole spacing, diameter and quantity
will vary between mounting families. Connection
plates are typically designed to accommodate two
mounting families. Dimensions of the connection
plate can be found in the Technical Data section of
this manual.

Allied offers an array of bolt-on mounting brackets
(Fig. 6-1) to fit virtually any carrier, including those
equipped with pin-grab or hook-type mounting
couplers.

IMPORTANT

The Ho-Pac does not include a mounting bracket.
Order separately. Bracket design is carrier
specific. The carrier’s bucket pins will be used
whenever possible. Ordering requires complete
information about the carrier, including make,
model, series and serial number. If equipped with
a quick coupler, additional information is required.
Make, model, series and serial number.

In Table 6.1, the mounting ‘Family’ designates a
sizing system used by Allied to identify various
connection plates. Flat top mountings are also used
on Allied’s hydraulic breakers.

Table 6.1 Mounting & Hardware for Ho-Pac 1600 with Flat Top

Family

Model

Bolt

FL Washer

Nut

Bolt Set

SR

1600-FT

719815 3/4 x 3 ¾ (x8)

798064 (x16)

658839 (x8)

574820

MR

719520 1 x 3 ½ (x8)

719521 (x16)

620600 (x8)

574821

Follow proper tightening procedures and torque.

«
...
15
16
17
18
19
...
»

Содержание Ho-Pac 1600



















































Отзывы:

Нет отзывов