manualshive.com logo in svg

Allied H12E, Руководство по обслуживанию, Страница: 64 / 121

Поделиться
Скачать
Allied H12E Скачать руководство пользователя страница 64

 Section 3

3 - 1

Service

INTERVAL

PROCEDURE OR QUANTITY

SPECIFICATION

50 hours or weekly

Check oil level at plug (item 2). Add oil as 
necessary through fi ll plug (item 4). 

Do not 

operate dozer when checking the oil level.

See Oil Specifi cations in Section 1.

Clean the breather (item 5).

Remove  debris  around  breather.  Clean 
the breather with solvent if necessary.

Lubricate the rollers on the fairlead assembly, 
if the winch is so equipped.

Use multi-purpose grease with 2-4% 
molybdenum disulfi de.

2000 hours or every 12 
months

Change the gear oil. Drain oil from plug (item 
3). Add oil through fi ll plug (item 4). Check the 
oil level at oil level check plug (item 2).

See Oil Specifi cations and Oil Capacity 
in Section 1.

General 

This section provides the instructions for performing 
maintenance and making checks and adjustments. 
Standard shop tools are used in doing the work described 
in this section.

Maintenance

The Maintenance Schedule is a program that includes 
periodic inspection and lubrication. Use the operating 
time on the hour meter of the dozer to determine the 
maintenance time for the winch.

3

2

1

4

5

5

MAINTENANCE &

WARNING DECALS

1

4

1

1

1. 

Access Cover for Motor and Winch Hydraulics

2. 

Oil Level Check Plug

3. 

Oil Drain Plug

4. 

Oil Fill Plug

5. Breather

Figure 3-1  H12E Winch Maintenance Points

Table 3-1   H12E Winch Maintenance Schedule

Содержание H12E


























































































































Отзывы:

Нет отзывов