Allied 300 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 66

Allied 300 Скачать руководство пользователя страница 15

Allied Construction Products, LLC Technical Manual Ho-Pac 300, 300B & 500, 500B

4

maintenance and repair as specified in
the care and maintenance schedule.

Use only genuine Allied replacement
parts and recommended lubricants to
protect total warranty coverage.

Maintain written records of Ho-Pac
maintenance, service and repair. These
records are helpful if warranty coverage
is ever in question.

Each record shall include at least:

Date of the service, maintenance or
repair.

Description of the service, maintenance
or repair performed. Include part
numbers if applicable.

Copies of purchase order and invoices
for repair parts and service.

The name and signature of the person
performing the service, maintenance or
repair.

3.3 Allied Product Policies

In this manual, Allied recommends Ho-Pac
applications, maintenance and service
consistent with industry practices.
Allied assumes no responsibility for the
results of actions not recommended in this
manual and specifically the results of:

Improper Training

Improper Installation (Failure to
properly calibrate the host machine)

Operation in unapproved
applications

Incorrect operation

Improper maintenance

Use of non-genuine Allied
replacement parts

Unapproved modifications

These exclusions apply to damage to the
Allied equipment, associated equipment and
injury to personnel.

«
...
13
14
15
16
17
...
»

Содержание 300



































































Отзывы:

Нет отзывов