Prosilica GT Technical Manual V2.4.1
61
Camera interfaces
Gigabit Ethernet port
The Prosilica GT is powered through the 12-pin Hirose Camera I/O port, or the
Gigabit Ethernet port by using any standard Power over Ethernet (PoE) sup-
ported network card, switch, or injector. Allied Vision recommends using Cate-
gory 6 or higher compatible cabling for best performance.
www
The
GigE Installation Manual
offers detailed instructions for
using Prosilica GT cameras.
www
See
Hardware Selection for Allied Vision GigE Cameras
appli-
cation note for a list of recommended Ethernet adapters:
Note
A standard Ethernet adapter is available for purchase from
Allied Vision:
P/N: 02-3002A
Model: Intel Pro 1000/PT
A dual port PoE Ethernet adapter is available for purchase from
Allied Vision:
P/N: 2685
Model: Adlink GIE62+
Note
Cable lengths up to 100 m are supported.
The 8-pin RJ-45 jack has the pin assignment according to the
Ethernet standard (IEEE 802.3 1000BASE-T).
Note
Prosilica GT cameras support cables with horizontal locking
screw connector for a secured connection (see figure 48).
Allied Vision recommends using locking-screw cables from
Components Express, Inc. for a perfect fit. Visit the
to customize the cable according to your needs.