Description of the data path
MANTA Technical Manual
V4.1.0
76
Color interpolation (BAYER demosaicing)
The color sensors capture the color information via so-called primary color (R-
G-B) filters placed over the individual pixels in a
BAYER mosaic
layout. An
effective BAYER
RGB color interpolation already takes place in all Manta
color version cameras.
In color interpolation a red, green or blue value is determined for each pixel. An
AVT proprietary BAYER demosaicing algorithm is used for this interpolation
(2x2), optimized for both sharpness of contours as well as reduction of false
edge coloring.
Color processing can be bypassed by using so-called RAW image transfer.
RAW mode is primarily used to
•
save bandwidths on the Gigabit Ethernet network
•
achieve higher frame rates
•
use different BAYER demosaicing algorithms on the PC
– for Manta the first pixel of the sensor is
RED
Figure 36: BAYER demosaicing (example of 2x2 matrix)
Note
If the PC does not perform BAYER to RGB post-processing, the
b/w image will be superimposed with a checkerboard pattern.
x