IP settings: preliminary considerations
How to install a GigE camera (Bigeye/Pearleye/Goldeye)
V2.0.0
14
Static Persistent IP for GigE Vision camera
To store a persistent IP for a camera with GEV firmware the Pleora software
GEVPlayer should be used. Please refer to Chapter
Installing GigE driver from
Pleora
on page 18 regarding installation of this software.
1.
Open GEVPlayer, select the camera and set the desired persistent IP
2.
Open the “GEV Device Control” dialog and change the following values:
GevCurrentIPConfigurationPersistentIP
Set to true
GevPersistentIPAddress
Set IP Address
GevPersistentSubnetMask
Set Subnet Mask
Figure 3: GEV Device Selection