Rapier 48w Switch
20
Safety
WARNING:
In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
WARNING:
Class 1 Laser product.
WARNING:
Do not stare into the laser beam.
CAUTION: Use of controls or adjustments of performance or procedures
other than those specified herein may result in hazardous radiation exposure.
ELECTRICAL NOTICES
WARNING:
ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable
parts inside. This unit contains HAZARDOUS VOLTAGES and should only be
opened by a trained and qualified technician.
LIGHTNING DANGER
DANGER:
DO NOT WORK on equipment or CABLES during periods of
LIGHTNING ACTIVITY.
CAUTION:
POWER CORD IS USED AS A DISCONNECTION DEVICE. TO
DE-ENERGIZE EQUIPMENT, disconnect the power cord.
CAUTION:
Air vents must not be blocked and must have free access to the
room ambient air for cooling.
OPERATING TEMPERATURE:
This product is designed for a maximum
ambient temperature of 50 degrees C.
CAUTION:
MECHANICAL LOADING - Mounting of the equipment in the
rack should be such that a hazardous condition is not achieved due to uneven
loading.
Lithium Battery - Should only be changed by authorised service personnel.
CAUTION:
Danger of explosion if battery incorrectly replaced. Replace only
with Lithium Battery, type CR2032, and dispose of in accordance with the
manufacturer’s recommendations and all local codes.
ALL COUNTRIES:
Install product in accordance with local and National
Electrical Codes.
WARNING:
For centralized DC power connection, install only in a restricted
access area.
WARNING:
Only trained and qualified personnel are allowed to install or
replace this equipment.
WARNING:
As a safety precaution, a 15 Amp circuit breaker should be
installed at the supply end of the cable to be used with this LAN equipment.
