Allied Telesis FastPrint Server Скачать руководство пользователя страница 66

Страница: 66 / 100

Chapter 8. Management Tools

FPSAdmin

FastPrint Server User’s Guide

8.1.3.

Icons

The icons provide status information as well as access to the selected FastPrint settings.
If an icon is grayed out, that option is unavailable. For example, unsupported protocols
are grayed out.

Device Information

Menu equivalent:

Status - Device Information

This option allows you to view all of the FastPrint settings in a scrollable list. The
data can not be changed.

Printer Status

Menu equivalent:

Status - Port Status

There is one icon for each parallel port. Non-existent ports are grayed out.
Selecting an icon will result in a screen like the following example:

Figure 21 Printer Status

If the printer is bi-directional, and the printer is not busy, the

Configuration

button will be available, allowing you to change the configuration of the attached
printer. See

Printer configuration,

below, for more details.

NetWare

Menu equivalent:

Configuration – NetWare

Select the Operation Mode (Print Server or Remote Printer) and click

Print Server

Configuration

. You will see one of the following screens:

Figure 22 NetWare Print Server Configuration

Содержание FastPrint Server





































































































Результаты поиска

Содержание FastPrint Server

Отзывы:

Allied Telesis FastPrint Server, Руководство пользователя, Страница: 66 / 100

Результаты поиска

Содержание FastPrint Server

Отзывы: