Chapter 7. Windows Peer-to-Peer
Software configuration
FastPrint Server User’s Guide
50
7.5.3.
Windows NT 3.51
This procedure must be carried out on every workstation requiring access to the
FastPrint’s printers. The FastPrint driver must be installed first.
Before proceeding, check the following:
•
The FastPrint Server is ON and configured (if using TCP/IP).
•
One or more printer(s) are connected to the FastPrint, and on-line.
•
The LAN is operational and using the appropriate protocol (either TCP/IP or
NetBEUI).
7.5.3.1.
First port configuration
1.
Go to Printer Manager. Select Printer
è
Create Printer.
2.
Select the appropriate printer driver for the printer connected to the FastPrint’s first
port.
3.
In the
Print to
dialogue box, select
PrintServer
.
4.
Click on
Settings
. The
Configure FastPrint Server
window will appear. It will look
like one of the screens below.
Figure 10 TCP/IP Configuration (NT 3.51 PtP)
Figure 11 NetBEUI Configuration (NT 3.51 PtP)
5.
Enter the configuration information as described in
Software configuration
on page
47.
6.
When finished, click
OK
and then follow the on-screen instructions to finish adding
a printer as you normally would.
Содержание FastPrint Server
Страница 1: ...User s Manual FastPrint Server FastPrint Server Printer Sharing Device...
Страница 2: ......
Страница 10: ......