CentreCOM AT-3624TS/AT-3624TRS Repeaters
27
To install blank faceplate/air-dam assembly
Note
Blank faceplate/air-dam assemblies are necessary to control air flow and
keep the rackmount chassis cool. Chassis are shipped with the faceplate/
air-dam assemblies in place. (Also see Chapter 2, “Hardware Installation”
on page 7.)
1.
Attach a blank faceplate/air-dam assembly to the empty slot.
2.
Align the faceplate/air-dam assembly.
3.
Slide the assembly along the chassis guides until the notch, on the end
of the faceplate/air-dam assembly, connects into the slot at the back of
the chassis.
4.
Screw the faceplate/airdam asembly in place on each end with one of
the supplied screws.
