C613-50102-01 REV C
Command Reference for x510 Series
1224
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
M
ULTICAST
C
OMMANDS
IPV
6
MROUTE
given IPv6 source, the multicast routing protocol will look at these static entries as
well as looking into the unicast routing table. The route with the lowest
administrative distance - whether a static “multicast route” or a route from the
unicast route table - will be chosen as the RPF route to the source.
Note that in this context the term “multicast route” does not imply a route via
which the current router will forward multicast; instead it refers to the route the
multicast will have traversed in order to arrive at the current router.
Examples
The following example creates a static multicast route back to the sources in the
2001::1/64
subnet. The multicast route is via the host
2002::2
, and has an
administrative distance of
2
:
awplus#
configure terminal
awplus(config)#
ipv6 mroute 2001::1/64 static 2 2002::2
The following example creates a static multicast route back to the sources in the
2002::2/64subnet. The multicast route is via the host 2001::1. The administrative
distance on this route has the default value of
0
:
awplus#
configure terminal
awplus(config)#
ipv6 mroute 2002::2/64 2001::1
Validation
Commands
