Allied Telesis AT-TQ Series Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 174

Allied Telesis AT-TQ Series Скачать руководство пользователя страница 49

AT-TQ Wireless Access Point Series User’s Guide

49

Table 3. Modify Radio Settings Window

Parameter

Description

Mode

Specifies the Physical Layer (PHY)
standard of the radio. The available
modes depend on the radio and country.

The modes for the 2.4 GHz radio are
listed here:

- IEEE 802.11b/g: The access point
accepts only 802.11b and 802.11g clients.

- IEEE 802.11b/g/n: The access point
accepts 802.11b, 802.11g, and 802.11n
clients operating at 2.4 GHz. This is the
default setting for the 2.4 GHz radio.

- 2.4 GHz IEEE 802.11n: The access
point accepts 802.11n clients operating at
2.4 GHz.

The modes for the 5 GHz radio in the AT-
TQ2450 and AT-TQ3600. access points
are listed here:

- IEEE 802.11a: The access point accepts
802.11a clients.

- IEEE 802.11a/n: The access point
accepts 802.11a and 802.11n clients
operating at 5 GHz. This is the default
setting for the 5 GHz radio for the AT-
TQ2450 and AT-TQ3600 access points.

- 5 GHz IEEE 802.11n: The access point
accepts 802.11n clients operating at 5
GHz.

The modes for the 5 GHz radio in the AT-
TQ4600 access points are listed here:

- IEEE 802.11a: The access point accepts
802.11a clients.

«
...
47
48
49
50
51
...
»

Содержание AT-TQ Series















































































































































































Отзывы:

Нет отзывов