Allied Telesis AT-TQ Series Скачать руководство пользователя страница 145 | Manualshive

Страница: 145 / 174

Allied Telesis AT-TQ Series Скачать руководство пользователя страница 145

AT-TQ Wireless Access Point Series User’s Guide

145

Table 24. SNMP

Field

Description

SNMP Enabled/Disabled

Use this option to activate or deactivate
SNMP on the access point. The options
are explained here:

Enabled: Check this option to activate
SNMP and allow managers to use it to
view and configure the parameter settings
on the access point. When you click the
option, the options in the window are
activated.

Disabled: Check this option to disable
SNMP to prevent managers from using it
to view and configure the parameter
settings on the access point. When you
click the option, the options in the window
are deactivated and cannot be configured.
This is the default setting.

Read-only community
name

Use this parameter to specify the read-
only community string on the access
point. This community string may only be
used to view the MIB settings of the
device. Here are the guidelines to creating
the community string:

The community string may be from 1 to
256 characters.

The community string may contain both
letters and numbers,

The community string may not contain
any spaces.

The community string is case sensitive.

You may specify only one read-only
community string.

You may not leave the field empty.

The default read-only community string is
“public”.

«
...
143
144
145
146
147
...
»

Содержание AT-TQ Series















































































































































































Отзывы:

Нет отзывов