Allied Telesis AT-TQ Series Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 174

Allied Telesis AT-TQ Series Скачать руководство пользователя страница 44

Chapter 3: Manage Menu

44

Table 2. Modify Wireless Settings Window

Field

Description

Radio On Off

Enables or disables the radio. The
selections are described here:

- On: Enables the radio. You have to
enable a radio before you can configure
its parameter settings.

- Off: Disables the radio. This is the
default setting.

MAC Address

Displays the MAC address of the radio.
This value cannot be changed.

Mode

Specifies the Physical Layer (PHY)
standard of the radio. The available
modes depend on the radio and country.

The modes for the 2.4 GHz radio are
listed here:

- IEEE 802.11b/g: The access point
accepts only 802.11b and 802.11g clients.

- IEEE 802.11b/g/n: The access point
accepts 802.11b, 802.11g, and 802.11n
clients operating at 2.4 GHz. This is the
default setting for the 2.4 GHz radio.

- 2.4 GHz IEEE 802.11n: The access
point accepts 802.11n clients operating at
2.4 GHz.

The modes for the 5 GHz radio in the AT-
TQ2450 and AT-TQ3600. access points
are listed here:

- IEEE 802.11a: The access point accepts
802.11a clients.

- IEEE 802.11a/n: The access point
accepts 802.11a and 802.11n clients
operating at 5 GHz. This is the default
setting for the 5 GHz radio for the AT-
TQ2450 and AT-TQ3600 access points.

«
...
42
43
44
45
46
...
»

Содержание AT-TQ Series















































































































































































Отзывы:

Нет отзывов