Configuring Services
Page 156
Configuring CoS Queueing and Scheduling
The
CoS Queuing & Scheduling Page
provides fields for configuring CoS Priority to Egress Queues and for
defining Egress Weights. The queue settings are set system-wide.
To define schedule and queue settings for Quality of Service:
1.
Click
Services > Queuing & Scheduling
. The
CoS Queuing & Scheduling Page
opens:
Figure 119: CoS Queuing & Scheduling Page
The
CoS Queuing & Scheduling Page
contains scheduling and Priority Queue settings for the defined CoS and
DSCP and contains the following fields:
•
Select Schedule
— Defines the priority method in queuing.
–
Strict Priority
— Indicates that traffic scheduling for the selected queue is based strictly on the queue
priority.
–
Weighted Priority
— Indicates that traffic scheduling for the selected queue is based strictly on the
Weighted Priority.
•
Configure Priority to Egress Queues
— Maps CoS (VPT tag) or DSCP values to a queue (1-4).
–
Configure CoS
— Maps CoS priority to a queue.
–
Configure DSCP
— Maps DSCP priority to a queue.
2.
Select a schedule type.
3.
Click
Apply
. The configuration is saved and the device is updated.
4.
Click
Save Config
on the menu to save the changes permanently.
