Allied Telesis AT-PC232/POE Скачать руководство пользователя страница 36

Страница: 36 / 62

Chapter 2: Installation

Selecting a Site

When selecting a site for your AT-PC232/POE Media Converter, observe
the following guidelines:

❒

Select a site that is dust-free and moisture-free.

❒

The site should allow for easy access to the fiber optic and twisted pair
cables and to the power cord.

❒

If the media converter will be installed on a table, the table should be
level and secure.

❒

Do not place objects on top of the media converter.

❒

Air flow around the unit and through its vents should be unrestricted.

❒

The power outlet for the device should be located near the unit and be
easy to access.

❒

Use a dedicated power circuit or power conditioner to supply reliable
power to the unit.

Reviewing the

Safety Guidelines

Please review the following safety guidelines before you begin to install
the AT-PC232/POE Media Converter.

Note

The

indicates that a translation of the safety statement is

available in a PDF document titled “Translated Safety Statements”
(613-000990) posted on the Allied Telesis website at
www.alliedtelesis.com. This document is also included with the
documentation CD that is shipped with the product.

Warning:

Class 1 Laser product.

Warning:

Do not stare into the laser beam.

Warning:

Class 1 LED product.

Warning:

The fiber optic ports contain a Class 1 laser device.

When the ports are disconnected, always cover them with the
provided plug. Exposed ports may cause skin or eye damage

Содержание AT-PC232/POE































































Результаты поиска

Содержание AT-PC232/POE

Отзывы:

Похожие инструкции для AT-PC232/POE

Бренды по названию

Популярные бренды

Allied Telesis AT-PC232/POE, Руководство по установке

Результаты поиска

Содержание AT-PC232/POE

Отзывы:

Похожие инструкции для AT-PC232/POE

Бренды по названию

Популярные бренды