Allied Telesis AT-IMC2000T/SC, Руководство по установке

Страница: 54 / 58

IMC2000/200 Series Media Converter Installation Guide
54
The end face of an unclean and clean ferrule are shown in Figure 27.
Figure 27. Unclean and Clean Ferrule
Using a Cartridge-Type Cleaner
Fiber-optic cartridge cleaners, shown in Figure 28, are available from
many vendors and are typically called “cartridge cleaners”.
Figure 28. Cartridge Cleaner
Note
Do not use compressed air or aerosol air to clean a fiber-optic
connector.
To clean a fiber-optic connector using a cartridge cleaner, perform the
following procedure.
1. With one hand, hold the cartridge cleaner and push the lever on the
cleaning cartridge in the direction of the arrow to expose the cleaning
surface, as shown in Figure 29 on page 55.
2. Place the ferrule tip on the exposed cleaning surface and rub the
ferrule in a downward direction, as shown in Figure 29 on page 55.
156
Unclean Clean
TAPE A
Wiping Direction
PUSH OPEN
PUSH OPEN
100