Allied Telesis AT-FS705LE, Руководство по установке

Страница: 28 / 46

14
Installing the Switch on a Wall
For wall-mount installation, you can position
the switch vertically or horizontally using the
keyhole cutouts in the bottom of the switch.
1. If previously attached, remove the rubber
feet, data cables, and the DC power cord from
the switch.
2. Select a wall location for the switch.
Note
For wall-mount installation, the screws,
plastic anchors, and any other material
necessary to physically mount the switch
to the wall are not provided.
3. Install two plastic anchors and two pan-head
screws into the wall, separated by 5
centimeters (approximately
2 inches).
4. Position the switch onto the wall screws.
Warning
The power cord is used as a
disconnection device. To de-energize
equipment, disconnect the power cord.
$
5