Allied Telesis AT-9812T Скачать руководство пользователя страница 11

Quick Install Guide

11

C613-04038-01 REV D

The

 AT-9800 Series Hardware Reference

 has further troubleshooting information, 

including information on Switch Port LEDs.

Documentation and Tools CD-ROM

The Documentation and Tools CD-ROM bundled with each switch contains the 
complete Documentation Set for AT-9800 Series switches and their expansion 
options, as well as tools for managing the Switch. This includes:

The 

AT-9800 Series Statutory and Safety Information

 booklet, which provides 

safety and statutory information for the Switch and its expansion options.

The 

AT-RPS9000 Series Statutory and Safety Information

 booklet, which 

includes important safety information and statutory declarations for the 
AT-RPS9000 chassis and AT-PWR9000 power unit.

The

 AT-9800 Series Hardware Reference

, which provides detailed 

information on the hardware features of AT-9800 Series switches.

This Quick Install Guide.

The 

AT-RPS9000 Quick Install Guide

, which outlines the procedure for 

installing AT-RPS9000 chassis and AT-PWR9000 power units.

The 

AT-9800 Series Software Reference

, which provides detailed information 

on configuring the Switch and its software.

The 

CAM Quick Install Guide, 

which outlines the procedure for installing 

Content Addressable Memory.

AT-TFTP Server for Windows, for downloading software releases.

Adobe Acrobat Reader, for viewing online documentation.

Netscape Communicator.

Microsoft Internet Explorer.

Содержание AT-9812T












Отзывы: