Allied Telesis AT-2701FTXa/SC, Инструкция по установке и эксплуатации, Страница: 82 / 94

Troubleshooting
82
Checking the Port LED on the Adapter
The AT-2701 series adapter comes with one or two LED’s, depending on
the model. You can use the status of the port LED for troubleshooting.
The AT-2701FXa model comes with a single combination LED that
indicates both the link status and activity status.
The AT-2701FTXa model comes with two LED’s. One LED indicates the
link status for either the copper or fiber port; the other indicates the activity
status for the port with the valid link.
Note
Before the port LED can provide troubleshooting information, the
driver software for your particular operating system must be installed
and the adapter must be connected to the network. See Chapter 3,
“Installing the Driver Software for Windows” on page 33.
Table 4 describes the link status that LED’s indicate.
Table 4. LED Status
State Description
On Valid link.
Off No link.
Flashing The port is receiving or transmitting network packets at
100 Mbps.