5
89-096
Rev: 11-2016
Hydraulic Hazards
Be aware of the hazards of pressurized hydraulics:
•
Wear personal protective equipment, such as gloves
and safety glasses, whenever servicing or checking
a hydraulic system.
•
Assume that all hydraulic hoses and components are
pressurized. Relieve all hydraulic pressure before
disconnecting any hydraulic line.
•
Never try to stop or check for a hydraulic leak with
any part of your body; use a piece of cardboard to
check for hydraulic leaks.
•
Small hydraulic hose leaks are extremely dangerous,
and can inject hydraulic
oil under the skin, even
through gloves.
•
Infection and gangrene
are possible when
hydraulic oil penetrates
the skin. See a doctor
immediately to prevent
loss of limb or death.
Maintenance Safety
•
Perform all routine maintenance outlined in this Op-
erator’s Manual in the time intervals indicated.
•
Maintenance, lubrication and repair of this machine
can be dangerous unless performed properly. In
order to ensure safety, each person working on this
baler must have the necessary skills, information,
tools and equipment, and satisfy himself that his
work method is safe, correct, and meets his own
company’s requirements.
•
Do not attempt to make adjustments, or perform
repairs unless you are authorized and qualified to do
so.
•
Never attempt to service energized equipment.
•
Do not rely on the hydraulic system to support any
part of the baler during maintenance or lubrica-
tion. Never stand under a baler component that is
supported only by the hydraulic system. Ensure
components are resting on their mechanical stops
or supported with appropriate safety stands during
maintenance or lubrication.
•
Never attempt servicing while the baler is moving.
Shut off the tractor and secure power.
•
Shut off tractor and baler engine, engage the parking
brake, disengage the baler, and wait for all move-
ment to stop before adjusting, lubricating, cleaning,
or servicing the baler.
•
Tag the key switch with a ”DO NOT START” sign
and/or remove the key.
•
Always perform all maintenance and lubrication
procedures with the baler on level ground, parked in
a safe area.
•
Block the tires to keep the machine from rolling.
•
Any unauthorized modifications made to the baler
by the customer or parties other than Allied Systems
will relieve Allied Systems Company and your Free-
man dealer of any liability for damage or injury.
•
Replace any worn parts only with genuine Freeman
parts. Call your dealer for assistance.
•
Unless specified in service procedures, never at-
tempt maintenance or lubrication procedures while
the baler is moving or the engine is running.
•
Engine exhaust fumes
can cause death. If it
is necessary to run the
engine in an enclosed
space, remove the
exhaust fumes from the
area with an exhaust
pipe extension. Use
ventilation fans and open
shop doors to provide
adequate ventilation.
•
DO NOT remove the ra-
diator cap when the en-
gine is hot. The coolant
will be under pressure
and can flash to steam
with explosive force,
causing severe burns. To
prevent burns, remove
the radiator cap only
when the engine is cool.
•
Batteries contain sulfuric acid which can cause se-
vere burns. Avoid contact with skin, eyes or clothing.
Содержание Freeman 370
Страница 8: ...Intentionally Left Blank 8 89 096 Rev 11 2016...
Страница 13: ...Intentionally Left Blank 13 89 096 Rev 11 2016...
Страница 25: ...Intentionally Left Blank 25 89 096 Rev 11 2016...
Страница 107: ...Intentionally Left Blank 107 89 096 Rev 11 2016...
