This section contains all components of the Gearbox
baler that are not included in the standard Engine/
Hydro Parts Manual. This includes all parts that can
be separately identified as well as parts necessary for
equipment support.
Illustrations
Illustrations are provided whenever possible to rep-
resent component parts and the mounting location of
those parts. The numbered labels correspond to the
item numbers in the parts list.
Parts Lists
Component parts lists are presented in a 5-column
format:
Item:
Index numbers found in this column correspond
to the numbers found on the respective parts loca-
tion illustration. Some items are shown for reference
purposes only to illustrate their relationship to other
systems.
Notes:
This column identifies footnotes applicable to
specified items.
Part Number:
This column lists the Allied Systems
Company Part Number.
Quantity:
This column lists the total number of a
specific item required per assembly or subassembly.
This number may not necessarily be the number of
items used in the end item or system. Only one set of
components is listed whenever the components of two
assemblies are the same.
“
A/R
” (as required) identifies bulk items whose
length or other dimension must be specified when
requisitioning.
“
Ref
” identifies items shown for reference purposes
only to illustrate their relationship to other systems.
“
NSS
” (not sold separately) identifies items such as
valve housings and spools, ring gears and pinions,
etc., which must be ordered as a set because they
are closely mated at manufacture.
Description:
This column lists the item nomenclature
along with those modifiers necessary to identify the
item. Additionally, cross references for repairable sub-
assemblies are listed in this column. One dot preced-
ing the description indicates that the item is a compo-
nent part of the previously listed item or assembly with
no dot. Two dots indicate that the item is part of the
previously listed item with one dot.
Example:
Engine Installation
. Engine Assembly
. . Manifold Assembly
. . Control Box Assembly
. . . Module Assembly
The Engine Assembly is a first level subassembly of
the Engine Installation as indicated with one dot. The
Manifold Assembly and the Control Box Assembly are
second level components of the Engine Assembly as
indicated by the two dots. The Module Assembly is a
third level component of the Control Box Assembly
which is indicated with three dots.
Gearbox Baler Parts
11
89-096
Rev: 11-2016
Содержание Freeman 370
Страница 8: ...Intentionally Left Blank 8 89 096 Rev 11 2016...
Страница 13: ...Intentionally Left Blank 13 89 096 Rev 11 2016...
Страница 25: ...Intentionally Left Blank 25 89 096 Rev 11 2016...
Страница 107: ...Intentionally Left Blank 107 89 096 Rev 11 2016...
