ENGLISH 15.09.07
Page 18 / 78
FEELING 32
FEELING – GROUPE ALLIAURA MARINE – BP 231 – 85106 Les Sables d’Olonne Cedex -France
Tel 33 (0)2 51 21 18 83 Fax 33 (0)2 51 96 91 95 – http//:www.alliaura.com
ATTENTION!
- Never interfere with the tightening of the seacocks to the hull. In the event of a leak, consult
a
professional.
- In bad weather or when leaving your boat, close all the sanitation system seacocks.
- Keep seacocks closed when not being used.
- During wintering, clean and rinse the seacocks and skin fittings. Inspect brass fittings; slight
surface corrosion is normal.
- In the event of more serious corrosion, consult your agent.
Seawater seacock for Toilet Wash-basin drain seacock Toilet drain seacock
6.4. Operation of the sea toilets
- Open the sea-water inlet seacock.
- Open the bowl emptying seacock.
- Set the lever to the “FLUSH” position.
- Operate the pump
- To empty the bowl and avoid any water slopping when heeling, set the lever to the
“DRY BOWL” position.
-
Operate the pump until the bowl is dry.
- Repeat these flushing / emptying operations as many times as is necessary to ensure
complete emptying of the pipes.
-
When toilets are not being used, set the lever to the "DRY BOWL" position, or
the "CLEF" position for certain models.
-
Close seacocks after use, as the toilet is below the waterline
Change the toilet seals regularly