ALLIANCE ALLWH3.2kW, Техническое руководство

Страница: 24 / 39

AA –HP410-2011-02 Alliance Cycle-Heating Domestic Heat Pump Water Heater Technical Manual
24
The water heater must be earthed.
Do not connect the earthing wire to gas or water pipes, lightning rod or a telephone earthing wire.
Incomplete earthing may result in electric shocks.
Be sure to install an earth leakage breaker. Failure to install an earth leakage breaker may result in electric
shocks.
First connect the outdoor unit wires before connecting the indoor unit wires.
Do not connect the power supply to the units until final wiring and piping of the units is done.
Be sure to install drain piping in order to ensure proper drainage, and insulate piping in order to prevent
condensation. Improper drain piping may result in water leakage and property damage.
Young children should be supervised to ensure that they do not play with the appliance.
Don't install the heat pump in the following locations:
Where petrolatum exists.
Directly exposed to salty air (near the coast).
Where caustic gas (e.g sulfide) exists in the air (near a hot spring).
In areas of excessive vibration (e.g. as can occur in factories).
Inside buses or cabinets.
Inside kitchens
Where strong electromagnetic waves exist.
In close proximity to inflammable materials, gas, acids or evaporating alkaline liquids.
2. Installation information
Before installation, please read this manual first.
The HPWH must be installed by qualified personnel.
When installing the tank and piping, please follow this instruction manual as strictly as possible.
If the HPWH is installed on a metal part of the building, it must be electrically insulated according to the
relevant standards of electrical appliances.
When all the installation work is finished, turn on the power only after a thorough check.
This manual is subject to changes due to technological improvement without further notice.
INSTALLATION ORDER
Select the location
Install the outdoor unit;
Install the water tank
Install the connecting pipe
Connect the drain pipe
Connect wiring
Test operation.