Cod. G522433
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 00/0510
3
Safety Instructions
3
16.
WARNING!
MACHINE INSPECTION, FILTER CLEANING, MAINTENANCE, SERVICE OR PARTS
REPLACEMENT
Before attempting any service or inspection of the washing machine:
Close and mechanically interlock the water supply valves and check that machine has
COMPLETELY
drained, parts have cooled down and that no pieces are in movement through inertia.
To reduce the risk of electrical shock:
COMPLETELY
disconnect the machine from the original power source and check for accidental
reconnection.
MOVING THE ON SWITCH TO THE OFF POSITION IS NOT SUFFICIENT.
Disconnect the electrical power of the external dosing to the washing machine. These circuits are
independent of the washer’s supply.
Wait a minimum of (5) five minutes after disconnection to ensure the elimination of residual voltage
within the machine.
Failure to comply with this warning may result in serious injury.
17.
NEVER
START THE MACHINE NOR USE IT IN THE ABSENCE, INCORRECT POSITION OR
MALFUNCTION OF:
COVERS (SAFETY GUARDS) AND PROTECTION
SAFETY DEVICES
CONTROL DEVICES
18. The room
SHALL
comply with the environment conditions (air venting, temperature, humidity...)
specified in the Installation Instruction Handbook. NEVER INSTALL THE WASHING MACHINE in very
humid environments or with water splashes.
19.
DO NOT OPERATE
the machine if it is suspected to be faulty, either visually, by noise or smell, or with
missing or broken parts.
20.
Machine start-up
SHALL
be made by Authorised Service Technicians
(refer to note 2).
21. Machine
SHALL BE USED
by qualified personnel
(refer to note 1)
, 1 wholly familiar with the machine’s
operation.
22.
DO NOT
allow children or people with handicaps incompatible to machine use to operate machine.
23. Every machine working with temperature has a fire hazard, take
SPECIAL
care.
KEEP
appliance area
free from combustible materials and fire extinguishers should be
PLACED
near the machines and
should be easily accessible to all laundry staff.
24. Delimitate danger areas and
PREVENT
public access to them with machine in operation. Do not
expose yourself to the dispenser, drain and rear overflow steam exhaust.
25. On completion of the day's work,
TURN OFF
the manual supply valves and
DISCONNECT
the electrical
power by the External Automatic Switch.
26.
Always
CONTACT an Authorised Service Technician or Licensed Installer
(refer to notes 2 & 3)
about
any problems or conditions you do not understand.
27.
For a safe operation, machine MUST
be kept in a good environment, used and maintained properly.
We recommend asking annually the Authorised Technical Service for a thorough overhaul
(refer to note
2).
28.
The Distributor (seller) IS OBLIGED
to thoroughly train the operator during the starting-up.
IN THE EVENT OF THESE SAFETY INSTRUCTIONS AND ALL THE INFORMATION SUPPLIED IN THE
CORRESPONDING MANUALS NOT BEING ADHERED TO, THE MANUFACTURER DECLINES ALL
RESPONSIBILITY.
KEEP THESE INSTRUCTIONS
NOTES:
(1)
Qualified Personnel
refers to anyone who has read the Instructions Handbooks, has been trained and has a
thorough understanding of the machine’s operation
(2)
An Authorised Service Technician (AST)
is one that has successfully completed training on the product by the
manufacturer or a manufacturer Distributor.
(3)
An Authorised Licensed Installer
is one that is suitably qualified in the procedures and regulations applicable in
that country.
