Cycle Operation
The cycles of your washer include several different stages. Refer to
the table below for what can be expected during the cycles that
you select.
The washer operates by gently tumbling the clothing through the
water. The wash action consists of a period of tumbling in one di-
rection, a brief pause, and then a reverse tumble in the opposite di-
rection. The pauses are part of the tumble action and add to the
unique cleaning capabilities of the washer. They are part of the cy-
cle.
The wash and rinse spins utilize a “ramp spin” action. The wash drum
starts rotating clockwise at a low speed and then gradually spins
up to higher speeds to efficiently extract water.
The cycle stages are dependent on the cycle, selections and op-
tions chosen.
The times listed are approximate and will vary depending on the se-
lections and options chosen.
NOTE: The rinse water temperature will be cold, includ-
ing when optional rinses are selected.
NOTE: If No Spin is selected, all spin stages are one mi-
nute of drain and tumble.
Heavy Duty, Whites, Normal Eco, Perm Press, Bulky and Quick Wash Cycles
Cycle Stage
Activity
Time (minutes)
Comments
Initial Drain
Drain
0:10
Removes water that might be
left over from previous cycle
Wetting
Fill/Tumble
2:30
Soak
Fill/Tumble/Soak
34:00
Option
Pre-Wash
Fill/Tumble
7:00
Option
Wash
Fill/Tumble
Heavy Duty = 15:00
Whites = 20:00
Perm Press = 12:00
Normal Eco = 14:00
Bulky = 11:00
Quick Wash = 4:00
Spin
Ramp Spin
4:35
Rinse
Fill/Tumble
3:25
Not active in Quick Wash Cycle
Spin
Ramp Spin
4:35
Not active in Quick Wash Cycle
Second Rinse
Fill/Tumble
3:25
Option
Ramp Spin
4:35
Option
Third Rinse
Fill/Tumble
3:25
Option
Ramp Spin
4:35
Option
Fill/Tumble
3:25
Option
Ramp Spin
4:35
Option
Cycle Operation
Part No. 804648R3
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
13
