WARNING
To reduce the risk of serious injury, do not bypass
the loading door switch by permitting the washer to
tumble or spin with the loading door open.
W095
5. If not already on (control lights will be lit), turn on the washer.
Press the Power button to turn on the washer.
NOTE: You will not be able to press the Start/Pause
button to start a cycle until five seconds after turning
on the washer. The display will show “--” if Start/
Pause button is pressed during this warm-up period.
6. Select the cycle according to the type of fabric being washed. If
the selected cycle is not the correct cycle for the fabric being
washed, you may change the cycle selection at any time until
the first wash fill is complete.
NOTE: The Normal Eco cycle is recommended for
everyday cottons and linens.
7. If desired change the Selections and Options settings.
8. Press the Start/Pause button to begin the cycle. The Door
Lock light will come on after a short delay and the cycle will be-
gin.
NOTE: If the door is open when trying to start a cy-
cle, the display will show “do” and cycle time (1 sec-
ond on/1 second off).
If items need to be added or removed after a cycle has started,
press the Start/Pause button. The door will unlock allowing the ad-
dition or removal of laundry. While a cycle is paused, the display will
show the cycle time remaining and “St” to restart the cycle. Close
the door and press the Start/Pause button to resume the cycle.
The door lock light will flash while the door re-locks.
Out of Balance Load
If at the end of the cycle the load is dripping wet, the washer has
limited the spin speed. This is to prevent damage to the unit if
there is a severely unbalanced load.
If this condition occurs, redistribute the load manually and run a
SPIN cycle.
If the condition persists, consider steps discussed in the Before
Washing section.
Control Panel
12
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
Part No. 804648R3
