© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
18
7-04-49
Monthly
Preventative Maintenance Checklist
Machine:
Month:
Operator:
Checks
Observe All Safety Warnings!
1. Each month or after every 200 hours of operation,
lubricate the bearings. (Refer to page 7 of the
Preventative Maintenance Guide for lubrication
specifications).
2. Use the following procedures to determine if the V-belts
require replacement or adjustment.
a. Check the V-belt(s) for uneven wear and frayed
edges.
b. Check for proper belt tension (refer to pages 7 and 8
of the Preventative Maintenance Guide for
specifications).
c. Check for proper alignment (refer to the chart on
page 8 of the Preventative Maintenance Guide).
3. Remove the back panel and check the overflow hose and
drain hose for leaks.
4. Unlock the hinged lid and check the supply dispenser
hoses and hose connections.
5. Use the following procedure to clean the inlet hose filter
screens:
a. Turn the water off and, if necessary, allow the valve
to cool.
b. Unscrew the inlet hose and remove the filter screen.
c. Clean the filter with soapy water and reinstall it.
Replace the filter screen if it is worn or damaged.
6. Tighten the motor mounting belts if necessary.
7. Clean the lint from the motor with compressed air.
8. Clean the interior of the washer-extractor, both the
basket and the shell, by wiping it with a sponge or cloth.
9. Remove any moisture or dust from all electrical
components with compressed air.
10.Remove the chemical supply components an check for
residual chemicals. Clean them as needed and re-install
them.
Laminate this checklist so that it can be re-used.