© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
8
7-04-49
Monthly
•
Deflection
. Loosen the motor mounting bolts and slide the
motor along the motor plate to change the belt span length.
Belt tension measurements should be taken as close to the
center of the belt span as possible. For every inch of span
length, the belt should deflect 1/64 inch (0.40mm). For
example, a belt with a span length of 50 inches should deflect
50/64 inches (19.84mm). An initial (run-in) force of 5.25
pounds should be used to set the belt tension. An operating
(normal) force of 3.5 pounds should be used after the
washer-extractor has operated for a few hours.
c. Verify that the V-belts are properly aligned by checking the
pulley alignment. Place a straightedge across both pulley
faces. The straightedge should make contact with the pulleys
in four places.
3. Remove the back panel and check the overflow hose and drain
hose for leaks.
4. Unlock the hinged lid and check the supply dispenser hoses and
hose connections.
H039I
Span Length
Deflection
H040I
Motor
Motor
Pulley
Straightedge
Basket
Pulley
