background image

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Safety Information

9001909

6

9. Do not install or store the washer where it will be 

exposed to water and/or weather.

10. Do not tamper with the controls.

11. Do not repair or replace any part of the washer, or 

attempt any servicing unless specifically 
recommended in the user-maintenance 
instructions or in published user-repair 
instructions that the user understands and has the 
skills to carry out.

12. To reduce the risk of an electric shock or fire, DO 

NOT use an extension cord or an adapter to 
connect the washer to the electrical power source.

13. Use washer only for its intended purpose, 

washing textiles.

14. Never wash machine parts or automotive parts in 

the machine. This could result in serious damage 
to the basket.

15. ALWAYS disconnect the washer from electrical 

supply before attempting any service. Disconnect 
the power cord by grasping the plug, not the cord.

16. Install the washer according to the 

INSTALLATION INSTRUCTIONS. All 
connections for water, drain, electrical power and 
grounding must comply with local codes and be 
made by licensed personnel when required.

17. To reduce the risk of fire, textiles which have 

traces of any flammable substances such as 
vegetable oil, cooking oil, machine oil, 
flammable chemicals, thinner, etc., or anything 
containing wax or chemicals such as in mops and 
cleaning cloths, must not be put into the washer. 
These flammable substances may cause the 
fabric to catch on fire by itself.

18. Do not use fabric softeners or products to 

eliminate static unless recommended by the 
manufacturer of the fabric softener or product.

19. Keep washer in good condition. Bumping or 

dropping the washer can damage safety features. 
If this occurs, have washer checked by a qualified 
service person.

20. If the supply cord is damaged, it must be replaced 

by a special cord or assembly available from the 
manufacturer or its service agent.

21. Be sure water connections have a shut-off valve 

and that fill hose connections are tight. CLOSE 
the shut-off valves at the end of each wash day.

22. Loading door MUST BE CLOSED any time the 

washer is to fill, tumble or spin. DO NOT bypass 
the loading door switch by permitting the washer 
to operate with the loading door open. 

23. Always read and follow manufacturer’s 

instructions on packages of laundry and cleaning 
aids. Heed all warnings or precautions. To reduce 
the risk of poisoning or chemical burns, keep 
them out of the reach of children at all times 
(preferably in a locked cabinet).

24. Always follow the fabric care instructions 

supplied by the textile manufacturer.

25. Never operate the washer with any guards and/or 

panels removed.

26. DO NOT operate the washer with missing or 

broken parts.

27. DO NOT bypass any safety devices.

28. Failure to install, maintain, and/or operate this 

washer according to the manufacturer’s 
instructions may result in conditions which can 
produce bodily injury and/or property damage.

NOTE: The WARNINGS and IMPORTANT 
SAFETY INSTRUCTIONS appearing in this 
manual are not meant to cover all possible 
conditions and situations that may occur. Common 
sense, caution and care must be exercised when 
installing, maintaining, or operating the washer.

Any problems or conditions not understood should be 
reported to the dealer, distributor, service agent or the 
manufacturer.

Содержание NX18BVPA6


























Отзывы: