ing bars (
) of the spring unit. Correct adjustment is performed
only if the same gap “X” between the board edge of vibrating
part and the top area of frame is reached on all four corners of the
machine's vibrating part.
ADJUSTMENT OF SPRING UNIT
1.
Adjusting nuts
2.
Guiding rods
3.
Spring suspension eyes
Figure 33
REPLACEMENT OF WASHER FUSES
FUSE VALUES
The correct fuse values can be found in the vicinity of the fuse
holders, and on the electrical scheme, and delivered with the ma-
chine. When a fuse is blown, you can replace it with the same
value. Never use a higher value. If the fuse blows again, do not
change it, but find the cause of the failure. Contact your distribu-
tor for help if necessary.
EARTH LEAKAGE TRIP (GROUND) OF
THE LAUNDRY
If the laundry is equipped with the earth leakage trip (ground) in
the inlet circuit of the electric switchboard, it is necessary to test
it regularly. The earth leakage trip is a very sensitive device and it
provides safety for operators by avoiding a risk of an electric
shock while the machine is in operation.
WARNING
A QUALIFIED TECHNICIAN MUST TEST THE EARTH
LEAKAGE TRIP (GROUND) FUNCTION AT LEAST
ONCE EVERY 3 MONTHS.
C219
THE TEST PROCEDURE:
Press the test button of the earth leakage trip while it is under ten-
sion.
The earth leakage trip must go off.
MAINTENANCE
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
59
Part No. D1612ENR3
