Alliance Laundry Systems D1528ENR3, Руководство по эксплуатации и техническому обслуживанию

Страница: 23 / 24

3. On machines equipped with an automatic chemical supply
system, check chemical connections by inspecting all connec-
tions and chemical hoses for leaks or cracks.
IMPORTANT: Chemical leaks can quickly cause perma-
nent damage to the machine components and struc-
ture.
Monthly
NOTE: Disconnect power to the machine at its source
before performing the monthly maintenance proce-
dures.
1. Check belt(s) require replacement or adjustment. Call a quali-
fied service technician in either case.
a. Check belt(s) for uneven wear and frayed edges.
b. For groove-pulley drive systems, verify alignment by
placing a straightedge across both pulley faces. The
straightedge should make contact with the pulleys in four
places. Refer to
Figure 46 . After making necessary ad-
justments, torque the upper spring tensioning jam nut to
20.6 ± 2 ft.-lbs.
CHM2428N_SVG
4
3
2
1
1. Motor
2. Motor Pulley
3. Straightedge
4. Basket Pulley
Figure 46
c. Verify belt tension. Refer to Belt Tension .
Belt Tension
Product Fam-
ily Model
Belt Tension
(lbs.)
Cabinet Hard-
mount 14, 18, 25, 65,
75 and 100 56-73
Belt Tension
Product Fam-
ily Model
Belt Tension
(lbs.)
30, 35, 135
and 165 77-100
33, 40, 150
and 185 116-151
55 and 235 119-154
75 and 305 149-194
90 and 400 112-149
Cabinet Free-
standing 12, 14, 18, 25,
60, 65, 75 and
100 106-172
30, 35, 135
and 165 71-139
55 and 235 185-236
75 and 305 240-266
455 and 575 90-103
730 and 900 113-148
Table 3
2. Check overflow hose and drain hose for leaks.
3. Check the supply dispenser hoses and hose connections.
4. Clean inlet hose filter screens:
a. Turn water off and allow valve to cool, if necessary.
b. Unscrew inlet hose and remove filter screen.
c. Clean with soapy water and reinstall. Replace if worn or
damaged.
Every Two Months
For 100 lb. (455 l), 135 lb. (575 l), 165 lb. (730 l) and 200 lb.
(900 l) Cabinet Freestanding models only, insert a small amount
of type EP2 grease into the grease injection ports located on the
back of the machine. Refer to
Figure 47 .
Maintenance
D1528ENR3
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 23