Alliance Laundry Systems D1528ENR3, Руководство по эксплуатации и техническому обслуживанию

Страница: 19 / 24

CFD266R_SVG
06
:
30_
1 2
1. Arrow icons
2. Check mark icon
Figure 40
2. Press the keypads under the arrow icons to adjust the
cycle start time. Refer to
Figure 40 . Press the keypads
under the left and right arrow icons to select a number.
Press the keypads under the up and down arrow icons
to adjust the selected number.
3. Press the keypad under the check mark icon to confirm
the cycle start time modification. Refer to
Figure 41 .
The cycle start day appears. Refer to Figure 41 .
CFD267R_SVG
06
:
30
fri
1 2
1. Arrow icons
2. Check mark icon
Figure 41
4. Press the keypads under the arrow icons to adjust the
cycle start day. Refer to
Figure 41 . Press the keypads
under the left and right arrow icons to select a number.
Press the keypads under the up and down arrow icons
to adjust the selected number.
5. Press the keypad under the check mark icon to confirm
the cycle start day modification. Refer to
Figure 41 .
6. Press the Start/Stop keypad. Refer to Figure 19 . The
Predefined Cycle Start Time Confirmation screen ap-
pears. Refer to
Figure 42 .
CFD269R_SVG
Hot wash 40º-90ºC
13:44
f r i 6:30
Figure 42
3. To exit the Functions Menu, press the Start/Stop keypad. Re-
fer to
Figure 19 .
Information Menu – PRO Control
While a cycle is in progress, the operator may access the Infor-
mational Menu to view cycle details or to modify the cycle’s
temperature, water level, wash action or liquid soap pump signal
time.
1. To access the Information Menu press the keypad under the
small flipped-over leaflet icon (refer to
Figure 43 ).
CFD601N_SVG
Figure 43
The Information Menu is displayed. Refer to .
12
6
9 3
CFD958N_SVG
16:26
14
17 °C
0 °C
10 cm
19 cm
0 rpm
0 rpm
12 sec
3 sec
sec
0
0 . 00A
0 . 00A
0 . 00H
Z
28
10:56
min
0 51
5
min
0 00 h
7
9 8
11
12
1
10
3
4
5
6
7
2
1. Temperature: actual temperature, programmed temperature
2. Configuration/activate of the inlet valves
3. Actual time
4. Calculated end-time of the program
5. Time left of the actual component
6. Remaining Hold-Time
7. Data of the frequency inverter: current (A), frequency
(Hz), G-force
8. Check mark icon
9. Up and down arrow icon
10. Actual time of the signal for the pumps of the liquid soaps
(extend boards)
11. Wash-action: actual speed, programmed speed, action
time, stop time (pause)
12. Water level: actual level, programmed level
Figure 44
2. To modify the cycle...
Cygnus Operation
D1528ENR3
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 19