© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming
F8112301R3
34
Fault Codes
Fault codes indicate safety issues, which may cause
operator injury or property loss. Thus, when an alarm
occurs, control will lock out machine’s operation until
power has been cycled and a technician corrects
problem. Note that all fault codes are composed of
letter “F” followed by a code reference number.
Table 9
Programming Tips
•
Avoid using spins after wash program segments.
This can cause suspended soil to be redeposited
in fabric before it can be rinsed out.
•
For optimum agitation, program wash speed at
0.8 G’s (ex. 42 RPM in 60 pound, 38 RPM in 80/
100 pound) for machine. This will give best drop
in cylinder and best soil removal.
•
Use SmartSpin in programs for processing cotton
and other sturdy goods that can take higher
extract forces. This will reduce drying time and
energy consumption.
•
High spin speeds (> 80 G’s) can set wrinkles in
goods made of Visa and some other synthetic
materials.
•
For processing non-porous rubber mats, try a
long “
JoLt
” drain period instead of a final
extract. Jolt routine alternates short spin and
tumble segments and will effectively remove
water from non-porous goods because they are
continuously rearranged, freeing water trapped in
pockets.
Code Description
F1
Invalid control configuration or corrupted PS40
firmware. Load a new version or call for service.
F5
Door open switch was tripped during program.
Door lock mechanism is malfunctioning. This
problem must be corrected and power to machine
cycled in order to clear it.
F6
Door locked switch was tripped during program.
Door lock mechanism is malfunctioning. Problem
must be corrected and power to machine cycled in
order to clear it.
FA
Vibration switch is tripped at beginning of
program. Correct problem and cycle power to
clear.
E
Check keypad.
www.groupdynamics-laundry.com
