505828
15
Exhausting the dryer in hard-to-reach locations can be
accomplished by installing the 521P3 Flexible Metal
Vent Kit, available as optional equipment at extra cost.
The kit comes in two halves that can be separately
attached to the dryer and wall outlet. Once attached, the
dryer can be slid back into position and the two halves
can be connected from the front.
Dryer Airflow
Efficient dryer operation requires proper dryer airflow.
Proper dryer airflow can be evaluated by measuring the
static pressure. See chart below.
NOTE: This can be measured with a manometer
placed on the exhaust duct approximately two feet
(61 cm) from the dryer. See illustration below.
Reduced Clearance Elbow
Installing the dryer in shallow closets can be
accomplished by using an Elbow, Part No. 62688,
which is one inch narrower than a standard venting
elbow.
D320I
Q¢s dF¨a*dF F"d Fm a
D012IE0A
MANOMETER
EXHAUST
DUCT
F"¤amV "a4 F¤F
MAXIMUM STATIC
PRESSURE IN
WATER COLUMN
1.5 cm(.6")
D319IE0A
F=¤4F= dF""m4F d*p§
