Allett C 34, Руководство оператора и перечень запасных частей

Страница: 31 / 74

31
•
Remove the fuel cap and visually check the fuel level. Fill the tank before storing overnight in order
to reduce internal condensation.
•
The maximum fuel level is as shown.
•
Never over fill the fuel tank.
Checking belt/chain guards
•
There are two guards to check:
1. Main cover (Top of mower).
2. Plastic belt guard (LH side of mower).
Checking the cutting cylinder
•
Visually inspect the cutting cylinder and the bottom blade for any damage, misalignment or
distortion.
•
The cutting performance of the C20 & C24 mowers is highly dependent on the condition of both
the cylinder and bottom blade. Poorly maintained parts will lead to a poor quality of cut.
•
It is advised that the grinding/reconditioning of the cylinder and bottom blade be carried out by
either Turfmech Machinery Limited or a registered Allett dealer.
Testing the parking brake
WARNING - PREVENT ACCIDENTS
•
Carry out this check in a well ventilated area clear of obstacles and bystanders.
•
Ensure that the parking brake is engaged and start the engine.
•
Set the engine throttle control lever to slow speed.
•
Slowly engage the rear roller drive clutch.
•
The engine should stall without any movement of the mower.
•
If the mower moves forward against the parking brake then re-adjustment is required (refer -
Adjusting cables).