Allett C 34, Руководство оператора и перечень запасных частей

Страница: 18 / 74

18
Loading a driven cartridge
•
Before loading the cartridge ensure that the
locking knob on the side of the mower chassis is
loosened off by rotating it anti-clockwise.
•
Carefully lift the cartridge using the two red
handles and then lower it onto the support rails
on the inside of the mower chassis.
•
Slide the cartridge to the right until the power
transmission plate on the cartridge is almost in
contact with the drive plate on the mower. Line up
the holes on the cartridge power transmission plate
with the studs on the drive plate.
•
When lined up push the cartridge all the way to the
right (when facing the mower).
•
Finally, rotate the locking knob clockwise to secure
the cartridge.
Loading a non-driven cartridge
•
Before loading the cartridge ensure that the locking
knob on the side of the mower chassis is loosened off
by rotating it anti-clockwise.
•
Carefully lift the cartridge using the two red handles
and then lower it onto the support rails inside the
mower chassis.
•
When the cartridge is securely resting on the guide
rails slide it all the way to the right (when facing the
mower).
•
Finally, rotate the locking knob clockwise to secure the
cartridge.
Removing a cartridge
•
Reverse the procedure described above.