Allett C 34, Руководство оператора и перечень запасных частей

Страница: 24 / 74

24
•
To adjust the position of the front roller:
-
Locate the roller adjusters, these can be
found at the front of the machine on each
side of the chassis.
-
The front roller height can be altered with
these adjusters. Rotate clockwise to reduce
the height of cut and anti-clockwise to
increase the height of cut.
•
To alter the position of the groomer:
-
Firstly ensure that the groomer is
lowered and isn’t in the transport
position.
-
To do this you must loosen the two
knobs on each side of the cartridge.
-
If the groomer drops it was in the travel
position.
-
Place the groomer in its lowest position,
tighten the knobs and check the height
again.
•
To adjust the height of the groomer, turn the
two adjusters the same amount.
-
Clockwise will increase the height of the
groomer.
-
Anti-clockwise will lower the height of the
groomer.