allen WB2434 Скачать руководство пользователя страница 5

Страница: 5 / 48

068521

Page 5

GENERAL

INFORMATION

Load Capacity Ratings

Notes on Load Capacity Ratings:

1. Maximum span/rating with 12 ft sections (x10):

121ft @ 600lbs

• Total span above

INCLUDES

End Frame and Wheels

• Total span of

SECTIONS ONLY:

120 ft

2. All ratings are calculated using the largest sections available to achieve desired length.

• Excluding telescoping sections.

3. Load ratings are calculated using pneumatic tires.
4.

Deflection should exceed no more than 1.36” with Maximum span/weight applied.

5. Cable Tensioning Kit may be used to increase load capacity on larger workbridges. This is

NOT

recomended without

consulting an AEC product support specialist or Authorized AEC dealer

FIRST!

6. Calculations are done without factoring weather. Please note that in adverse weather conditions, capacity ratings

need to be decreased.

Please contact Allen Engineering PRODUCT SUPPORT with any questions reguarding load capacity.

500

700

900

1100

1300

1500

1700

1900

2100

2300

100

105

110

115

120

125

(in

unds)

SPAN

(in

Feet)

WB2434

‐

Capacity

Ratings

Содержание WB2434

















































Результаты поиска

Содержание WB2434

Отзывы:

allen WB2434, Сборка и каталог запчастей, Страница: 5 / 48

Результаты поиска

Содержание WB2434

Отзывы: