allen WB2434 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 48

allen WB2434 Скачать руководство пользователя страница 12

SECTION 1

SAFETY

068521

Page 12

Safety-Alert Signs

This manual contains Safety-Alert Signs, as defined below, which must be followed to

reduce the possibility of improper servi ce damage to the equipment or personal injury.

Read and follow all Safety-Alert Signs included in this manual.

NOTE

defines an operating procedure, condition, etc. which is essential to high-

light that contains useful or important information.

EMERGENCY

is used for the identification of safety equipment, first aid, or emer-

gency egress locations.

NOTICE

used to convey safety information on labels and signs.

CAUTION

is indicative of a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury.

WARNING

Indicative of a potentially hazardous situations that could result in

death or serious injury

DANGER

indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury

Manual Tag Safety Detail

«
...
10
11
12
13
14
...
»

Содержание WB2434

















































Отзывы:

Нет отзывов