allen TRTP75 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 48

allen TRTP75 Скачать руководство пользователя страница 7

075707

Page 7

General

Information

Information Contained in this Manual

This manual provides information and procedures to safely operate and maintain the Allen Machine.

For your own safety and protection from personal injury, carefully read, understand, and observe the
safety instructions described in this manual. Keep this manual or a copy of it with the machine at all
times.

Always operate this machine in accordance with the instructions described in this manual. A well
maintained piece of equipment will provide many years of trouble free operation.

This manual is divided into the following sections:

SECTION 1

SAFETY

SECTION 2

OPERATIONS

SECTION 3

SERVICE

Complete any warranty requirements as specified by the engine manufacturer in their instructions
found inside the manual box located under the operator platform on the motor side of the machine.

Your engine is not manufactured by Allen Engineering Corporation, Inc, and therefore is not covered
under Allen Engineering Corporation, Inc warranty.

Your engine manufacturer should be contacted if you wish to purchase a parts manual or a repair
manual for your engine.

Refer to enclosed Owner’s engine manual for complete O&M instructions. See your battery
manufacturer for battery warranty.

«
...
5
6
7
8
9
...
»

Содержание TRTP75

















































Отзывы:

Нет отзывов